LSI 9690SA-8E-KIT Guide d'installation télécharger pdf (Page 48)

Chapter 2. CLI Syntax Reference

40 3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.2

/cx show monitor

The /cx show monitor command shows the monitor (firmware boot-loader)

version of controller /cx.

Example:

//localhost> /c0 show monitor

/c0 Monitor Version = BLDR 2.x

/cx show numdrives

The /cx show numdrives command shows the number of drives currently

managed by the specified controller /cx. This report does not include

(logically) removed or exported drives.

Example:

//localhost> /c0 show numdrives

/c0 Number of Drives = 5

/cx show numports

The /cx show numports command shows the total number of physical

connections made to the controller and the maximum connections possible for

the controller.

Example for a 9650SE-16ML with no drives attached:

//localhost> /c0 show numports

/c0 Number of Ports = 16

Example for 9690SA-8E with 8 dual-port SAS drives:

//localhost> /c3 show numports

/c3 Connections = 16 of 128

/cx show numunits

The /cx show numunits command shows the number of units currently

managed by the specified controller /cx. This report does not include off-line

units (or removed units).

Example:

//localhost> /c0 show numunits

/c0 Number of Units = 1

/cx show pcb

The /cx show pcb command shows the Printed Circuit Board (PCB) version

of the specified controller /cx.

Example:

//localhost> /c0 show pcb

/c0 PCB Version = RevX

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 137 138

Pas de commentaire

LSI 9690SA-8E-KIT Guide d'installation Page 48