LSI U160 Manuel d'utilisateur télécharger pdf (Page 32)

3.75 pc 10.25 pc 11.25 pc 38.25 pc

4.333 pc

48.583 p

52.5 pc

34.5 pc

44.25 pc

2-12 Installing the LSIU160

If you have more than one internal device to connect, use an internal

SCSI ribbon cable with the required number of connectors attached

along its length and proceed to the next step. An example of this type of

connection is provided in Figure 2.6. If you have only one internal device,

proceed to Step 4 on page 2-14.

Step 3. Plug the cable into each additional device as needed.

An example of this type of chained connection is shown in

Figure 2.7. Make sure to match pin 1 on all connections.

Figure 2.6 Connecting Additional Internal SCSI Devices

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 89 90

Pas de commentaire

LSI U160 Manuel d'utilisateur Page 32