LSI SYM22801 Manuel d'utilisateur télécharger pdf (Page 28)

2-14 Installing the SYM22801 Host Adapter

Figure 2.9 Using Both Internal Connectors on a Channel

Note:

When two connectors are already used on a channel, the

third connector cannot be used.

Step 6. Most PC cabinets are designed with a front panel LED

(sometimes already connected to an existing IDE drive). You

may connect this LED cable to the host adapter, as shown in

Figure 2.10. This causes the front panel LED to indicate activity

on the SCSI bus.

This connector is not keyed. The orientation of the LED cable

does not matter as long as all four pins are connected.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 79 80

Pas de commentaire

LSI SYM22801 Manuel d'utilisateur Page 28