LSI U80ALVD Manuel d'utilisateur télécharger pdf (Page 29)

Detailed Installation Procedure 2-11

Step 2. Plug the 68-pin connector on the other end of the internal SCSI

ribbon cable into the SCSI connector on your internal SCSI

device. An example of this connection is shown in Figure 2.5.

You must match pin 1 on all connections.

Note: For nonterminated internal SCSI devices, a terminated

cable will be required. This connector must be on the end

of the SCSI cable.

Figure 2.5 Internal SCSI Ribbon Cable to Internal SCSI Device Connection

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 77 78

Pas de commentaire

LSI U80ALVD Manuel d'utilisateur Page 29