LSI Syncro CS 9286-8e Guide de l'utilisateur télécharger pdf (Page 39)

LSI Corporation

- 39 -

Syncro CS 9286-8e Solution User Guide

March 2013

Chapter 4: System Administration

Updating the MegaRAID Driver

4. Click Storage to expose the Syncro CS 9286-8e controller.

5. Right-click the Syncro CS 9286-8e controller and select Update Driver Software to start the Driver Update

wizard, as shown in the following figure.

Figure 35 Updating the Driver Software

6. Follow the instructions in the wizard.

4.4.2 Updating the MegaRAID Driver in Windows Server 2012

As a recommended best practice, always back up system data before updating the driver, and then perform a planned

failover. These steps are recommended because a driver update requires a system reboot.

1. Run Server Manager and select Local Server on the left panel.

2. Click the Tasks selection list on the right-hand side of the window, as shown in the following figure.

Syncro CS 92

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

Pas de commentaire

LSI Syncro CS 9286-8e Guide de l'utilisateur Page 39