Lsi 8751D Manuel d'utilisateur télécharger pdf (Page 24)

2-8 Installing the LSI8751D

Step 2. Plug the 68-pin connector on the other end of the internal SCSI

ribbon cable into the SCSI connector on your internal SCSI

device. (See Figure 2.5.) Make sure to match pin 1 on all

connections.

Figure 2.5 Internal SCSI Ribbon Cable to Internal SCSI Device

Connection

Step 3. Connect additional internal SCSI devices by using an internal

SCSI ribbon cable with the required number of 68-pin

connectors attached along its length as shown in Figure 2.6.

Figure 2.6 Connecting Additional Internal SCSI Devices

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 57 58

Pas de commentaire

Lsi 8751D Manuel d'utilisateur Page 24