Lsi 320 Manuel d'utilisateur télécharger pdf (Page 19)

Installing your Ultra320 SCSI Host Adapter 2-3

2.1.2 Inserting the Host Adapter

Perform the following steps to install your Ultra320 SCSI Host Adapter in

the PC mainboard.

Step 1. Remove the blank bracket panel on the back of the computer

that is aligned with the PCI-X slot you have selected.

Save the bracket screw.

Step 2. Carefully insert the edge connector J1 of the host adapter into

the PCI-X slot, as shown in Figure 2.2.

Figure 2.2 Inserting the Host Adapter

Step 3. Make sure the edge connector is properly aligned before

pressing the board into place. The bracket around connector J2

and J3 should ﬁt into the empty space where the blank bracket

panel was removed.

Bracket Screw

32-bit Slots

64-bit Slots

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Pas de commentaire

Lsi 320 Manuel d'utilisateur Page 19